IEEE standards download

IEEE 1267-2019 pdf download.IEEE Guide for Development of Specifications for Turnkey Substation Projects 3. General 3.1 Overall discussion and requirements of a substation turnkey specification The term turnkey refers to the method of contracting on a given project whereby the contractor assumes total responsibility for the execution of the project

IEEE 1234-2019 pdf download.IEEE Guide for Fault-Locating Techniques on Shielded Power Cable Systems 5. Safety 5.1 Safety practices When testing a cable system, personnel safety and service relability of the electrical systerms are of ultimate importance. All cable and equipment tests shall be performed on isolated and de- energized systems,

IEEE 1222-2019 pdf download.IEEE Standard for Testing and Performance for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines 4. ADSS cable and components 4.1 Descriptions The ADSS cable shall consist of coated glass optical fibers grouped in one or more protective dielectric units surrounded by

IEEE 1222-2011 pdf download.IEEE Standard for All-Dielectric Self-Supporting Fiber Optic Cable 2.3 Fiber optic cable core The fiber optic cable core shall be made up of coated glass optical fibers housed to protect the fibers from mechanical, environmental, and electrical stresses. Materials used within the core shall be compatible with

IEEE 1110-2019 pdf download.IEEE Guide for Synchronous Generator Modeling Practices and Parameter Verification with Applications in Power System Stability Analyses This guide contains instructions for modeling synchronous machines in direct- and quadrature-axis equivalent circuits, along with the basic transient and subtransient reactance/time-constants model in view of stability studies. It discusses

IEEE 1052-2018 pdf download.IEEE Guide for Specifcation of Transmission Static Synchronous Compensator (STATCOM) Systems This guide assists users in specifying the functional requirements for transmission static synchronous compensator (STATCOM) systems using forced commutated technology based on voltage sourced converter topologies. This guide covers specifcations, applications, engineering studies, main component characteristics,

IEEE 1036-2010 pdf download.IEEE Guide for Application of Shunt Power Capacitors IEEE 1036-2010 pdf downloadThis guide applies to the use of 50 Hz and 60 Hz shunt power capacitors rated 2400 Vac and above, and assemblies of such capacitors. Included are guidelines for the application, protection, and ratings of equipment

IEEE 1019-2013 pdf download.IEEE Recommended Practice for Specifying Electric Submersible Pump Cable—Polypropylene Insulation 5.2 Construction 5.2.1 Round design The three insulated conductors should be cabled around a centrally located filler that provides blockage. The conductors should be cabled with a left-hand lay having a maximum length of lay 35 times

IEEE 1018-2013 pdf download.IEEE Recommended Practice for Specifying Electric Submersible Pump Cable—Ethylene-Propylene Rubber Insulation Cable purchased under the recommendation of this recommended practice, unless otherwise specified herein, should meet the requirements of ASTM B3, ASTM B8, ASTM B33, ASTM B 189, ASTM B496, and ANSI/NEMA WC 71/ICEA S-96-659, where applicable.