IEEE standards list
IEEE C57.12.30-2010 pdf download.IEEE Standard for Pole-Mounted Equipment-Enclosure Integrity for Coastal Environments 4.2 Substrate requirements 4.2.1 General The substrate shall be a material that, when coated or otherwise processed, will maintain the structural integrity of the enclosure over the life of the apparatus. 4.2.2 Specification of substrate characteristics The apparatus
Continue reading
IEEE C37.66-2005 pdf download.IEEE Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV) 5.7 Rated capacitive switching current The preferred values for the rated capacitive switching current of capacitor switches are shown in Column 3 of Table 2 and Table 3. 5.7.1 Conditions of continuous capacitive
Continue reading
IEEE C37.48-2005 pdf download. IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories 4. General application guidelines for all fuse types 4.1 Introduction The application, operation, and maintenance of equipment covered by this guide is the responsibility of
Continue reading
IEEE C37.21-2017 pdf download.IEEE Standard for Control Switchboards 3. Defnitions For the purposes of this document, the following terms and defnitions apply. The IEEE Standards Dictionary Online should be consulted for terms not defned in this clause. The defnitions of terms contained in this standard, or in other standards referred
Continue reading
IEEE C37.20.7-2001 pdf download.IEEE Guide for Testing Medium-Voltage Metal-Enclosed Switchgear for Internal Arcing Faults 3.1.7 solid insulation: An applied insulation that is 1) homogeneous and essentially free of voids, 2) conformal to the shape of the bus, and 3) bonded to the bus in such a way that removal requires
Continue reading
IEEE C37.20.3-2001 pdf download.IEEE Standard for Metal-Enclosed Interrupter Switchgear Definitions The definitions of terms contained in this standard, or in other standards referred to in this standard are not intended to embrace all legitimate meanings of the terms. They are applicable only to the subject treated in this standard. If
Continue reading
IEEE C37.017-2010 pdf download.IEEE Standard for Bushings for High- Voltage [over 1000 V (ac)] Circuit Breakers and Gas-Insulated Switchgear 4. Normal (usual) and special (unusual) service conditions 4.1 General Clause 2 of IEEE Std C37.100.1-2007 applies. 4.2 Normal (usual) service conditions 4.2.1 Indoor application Subclause 2.1.1 of IEEE Std C37.100.1-2007
Continue reading
IEEE 1901.1-2018 pdf download.IEEE Standard for Medium Frequency (less than 12 MHz) Power Line Communications for Smart Grid Applications This standard specifies physical (PHY) and media access control (MAC) layers of the medium frequency band (less than 12 MHz) broadband power line communication technology for smart grid applications (SGPLC) based
Continue reading
IEEE 1856-2017 pdf download.IEEE Standard Framework for Prognostics and Health Management of Electronic Systems The goal of this standard is to provide information for the implementation of prognostics and health management (PHM) for electronic systems. Within the system health management community, there are several diferent interpretations of the term prognostics,
Continue reading
IEEE 1679.1-2017 pdf download.IEEE Guide for the Characterization and Evaluation of Lithium-Based Batteries in Stationary Applications 5. Technology description 5.1 General Refer to Clause 5 of IEEE Std 1679-2010. This clause describes the main lithium-based technologies that are either used or are being considered for stationary battery applications. These include
Continue reading